Voice over IP allows you to set up a VoIP phone service directly in SiteKiosk using a SIP gateway of your choice.
You can use the free trial version to test all features extensively. Please note that some
demo version restrictions apply.
You can bill this service (at a flat rate or using separate zones) or, for example, set up the terminal as a service or information station which users can use to reach co-workers/customer service consultants.
Enable Voice over IP and set up the following options to best fit your needs.
SiteKiosk supports the use of any SIP gateway. All SiteKiosk requires is your access information for the provider you use.
A SIP gateway lets users make phone calls from within SiteKiosk.
Click on Settings to set up your SIP gateway options.
- Connection settings:
Enter the host name or IP address of your gateway and select the appropriate port number. Use the advanced settings to add optional information if you are using a proxy or STUN server or want to optimize the audio settings.
- Account settings:
You can enter the user name and password of your gateway in this section. If the gateway requires additional authorization, you can also add an authorization name/id here.
- Phone extension of the terminal:
If you enter the phone number of the SIP account here, the SiteKiosk terminal will be able to receive calls. A user can see the number by pressing the info button on the Voice over IP page.
The caller's number will be displayed including the country code. Some SIP gateways do not send the country code if the call originates in the country in which they operate. In this case, SiteKiosk will use the country code based on the standards and formats settings you can find in the control panel of Windows under Regional and Language Options.
Notes:
If you plan to use more than one terminal and want to use the call-in option, you will need an account/number for each terminal.
If you want to use the option that allows you to call a terminal, you must specify a phone number in the corresponding field. However, the phone number you specify does not necessarily have to match the actual number of the terminal.
- Verifying your access information:
Make a test call to verify your settings are correct.
You can use Voice over IP and set up zones that allow you to bill, prohibit or provide free access to phone calls and SMS messages.
2.1 Add/edit/remove
The list is already populated with some standard providers. You can edit and remove entries and add your own.
-
Name of the zone
Assign a unique name to a zone. This makes it easier for you to manage the zones you create.
- Search pattern
Add all area codes/phone numbers to the search pattern list for which you want the zone to apply. Using an * as a placeholder is allowed.
If one search pattern applies to several zones, the most expensive zone will be used.
- Payment and access
Finish by specifying whether the zone is supposed to be allowed and free of or subject to a charge and specify the desired rates if applicable.
2.2 Load/delete/update zones
Click on the "Load zones" to download a list from the Web that contains pre-configured rates for making phone calls and sending SMS messages that are applicable in various different countries.
When the list has been loaded, the button will switch from "Load zones" to "Erase zones." One click will erase all pre-configured zones even if they have been subsequently edited.
Click on the "Update zones" to check on the Web whether an updated list of zones is available and can be downloaded. If downloaded, the updates will overwrite the existing settings. This feature is intended for users who do not wish to modify the per-configured settings.
Use the "Show dial pad" to provide users with a numeric keypad which they can use to enter telephone numbers.
You may select the option "Do not include country code for internal phone calls" to stop SiteKiosk from automatically adding a country code. This is especially useful if you require SiteKiosk to be able to dial internal numbers. Note that this option will only have an effect if the user selects "Specify a number ..." on the SitePhone interface. Otherwise, the country code will still be added if the user selects a country.
You can also create a set of service numbers. A button labeled with the service name you chose will be displayed which, when pressed, will cause SitePhone to automatically call the number you specified.
If you enable "Show application in separate window", the Voice over IP application will open in its own window rather than being displayed within the main SiteKiosk window.